Specialized Oilfield Tank Storage

Select a tab

Shale Bins 

While we don't stock shale bins or normally manufacture them on a regular basis, we will always provide a quote for an order of significant volume. 

We can make either a high or low sided bin. Typically bins are (40' x 10' x 4') complete with 1/2" floors and back wall.

The bins are normally slope sided for centrifuge, have a loader ramp, and can be designed with a front gate so that the unit is a 4 sided bin.

Send us a sketch or existing drawing and we will provide a quote in a timely manner.

Frac Tanks (Trailer or Non-Wheel design) 

While we don't stock frac tanks or normally manufacture them on a regular basis, we will always provide a quote for an order of significant volume.

Typically, frac tanks are 500 bbls/(21,000) gal units built with 1/4" floors, sides and ends. Roofs are usually 3/16".

Internal linings can be applied according to customer specifications.

Stairs can added as either be a front or side design.

Wheels are built in; the axel and suspension can be specified by the customer.

We have a full contingent of technical staff to design and draw a frac tank to meet your specific needs.

What are Frac Tanks?

A frac tank is used to hold a proppant or water when a natural gas or oil well is being hydraulically fractured. In the fracturing process, a water/proppant fluid is pumped into the wellbore at high pressure in order to push open the rock formation. The proppant (such as sand) is used to keep the formation open so that the oil or gas can be removed.

Mud Tanks 

While we don't stock shale bins or normally manufacture them on a regular basis, we will always provide a quote for an order of significant volume.

Typically, mud tanks are in the 200 to 300 bbl size, open on top, and comprising of 1/4" steel material.

We can provide any sump drain and manifold flange arrangement as required by the customer.

We can apply an internal lining if desired.

Rough Measurements 

• 35'-2" Overall Length
• 90" Wide
• 87 1/2" and 57 1/2" Overall Side Heights

We have a full contingent of technical staff to design and draw an invert tank to meet your specific needs.

Dual Containment Invert Tanks

While we don't stock invert tanks or normally manufacture them on a regular basis, we will always provide a quote for an order of significant volume. 

We can manufacture invert tanks up to 600 bbl. They are double wall containment systems which means no liners, berms or mats are required.

We can install overfill protection and supply gauges for remote access.

We can design a manifold that will provide superior circulation of fluids.

Invert tanks are multi use units that can be easily used for frac jobs and diesel storage.

We have a full contingent of technical staff to design and draw an invert tank to meet your specific needs.

Floc Tanks 

While we don't stock floc tanks or normally manufacture them on a regular basis, we will always provide a quote for an order of significant volume.

We can manufacture floc tanks to meet your specific needs. 

Typically a 300 bbl (40' x 12' x 4') unit with three (3) compartments is desirable. We can install a walkway and railing in any arrangement needed.

Steam coils can be incorporated into our units if required!

We have a full contingent of technical staff to design and draw a floc tank to meet your specific needs.